GIMP Chat
http://gimpchat.com/

6 step bowl
http://gimpchat.com/viewtopic.php?f=23&t=13809		 Page 1 of 5
Author:  sallyanne [ Wed Mar 16, 2016 1:55 pm ]
Post subject:  6 step bowl
1. Start with a square canvas
2. Fill it with a pattern/picture/gradient of your choice
3. Open G'MIC and go to render > 3D image object, use the cup.
4.*Before you press 'apply' or 'ok' rotate it, using x angle, y angle and z angle.
I used x angle - 149.80, y angle - 266.16, z angle - 177.05 (not sure that I moved this one much)
(You can play with other settings there too if you want it different)
5. Using the rectangle or elipse select just go around the top of the cup and bring the selection down as far as you wish. I cut the bottom of the round off with the selection.
6.'Crop to selection' That's it!
Image


Attachments:
6 Step Bowl.pdf [71.12 KiB]
Downloaded 500 times
Author:  trandoductin [ Wed Mar 16, 2016 2:16 pm ]
Post subject:  Re: 6 step bowl
you should let us know what angles you use too ... because it's extremely slow for me i got impatient and cancelled out before it had a chance to finish rendering preview.
Author:  dinasset [ Wed Mar 16, 2016 2:20 pm ]
Post subject:  Re: 6 step bowl
the bowl is nice, but what is the reason of cutting the bottom part with a straight line?
The bowl is seen from the high, thus the bottom part is necessarily round, for the rule of perspective.
This way of showing it makes sense only if the cut is the border of an imaginary frame, not if you think to show the bowl on a table. Am I wrong?
Author:  sallyanne [ Wed Mar 16, 2016 2:23 pm ]
Post subject:  Re: 6 step bowl
dinasset wrote:
the bowl is nice, but what is the reason of cutting the bottom part with a straight line?
The bowl is seen from the high, thus the bottom part is necessarily round, for the rule of perspective.
This way of showing it makes sense only if the cut is the border of an imaginary frame, not if you think to show the bowl on a table. Am I wrong?

I only did it to give the impression of a flat bottom - not all bowls are completly round at the base
Author:  oldmangrumpy [ Wed Mar 16, 2016 2:27 pm ]
Post subject:  Re: 6 step bowl
Sallyanne - thanks for the heads up on this - I love the results ... in glass of course !! I thought it was only me in Oz who does not sleep.

Image

Tran - I found it to be a very quick render.
Author:  dinasset [ Wed Mar 16, 2016 2:28 pm ]
Post subject:  Re: 6 step bowl
but it's impossible! Even a bowl with a totally flat base, when seen from the high, shows the bottom curved.
Do a test: take a bowl in your home, with a flat base, look at it from the high or even better take a picture and you see by definition a curved bottom...
Author:  sallyanne [ Wed Mar 16, 2016 2:29 pm ]
Post subject:  Re: 6 step bowl
trandoductin wrote:
you should let us know what angles you use too ... because it's extremely slow for me i got impatient and cancelled out before it had a chance to finish rendering preview.

x angle - 149.80
y angle - 266.16
z angle - 177.05 (not sure that I moved this one much)
Author:  dinasset [ Wed Mar 16, 2016 2:32 pm ]
Post subject:  Re: 6 step bowl
oh, OMG posted glasses in perspective, good !
Sallyanne, look at the base of those glasses, they are obviously flat otherwise the glasses weren't glasses, but rolling cups; nevertheless you do not see any straight flat line anywhere.
Author:  oldmangrumpy [ Wed Mar 16, 2016 2:35 pm ]
Post subject:  Re: 6 step bowl
Dinasset - since our discussions I have a perspective on everything now :hehe
Author:  dinasset [ Wed Mar 16, 2016 2:38 pm ]
Post subject:  Re: 6 step bowl
I hope you are happy with your new style of drawing, those are very well drawn, congrats, in addition to your usual nice textures and colours.
Author:  trandoductin [ Wed Mar 16, 2016 2:40 pm ]
Post subject:  Re: 6 step bowl
oh wow it's super fast now that i shut off my other process.
Image
Author:  Odinbc [ Wed Mar 16, 2016 3:47 pm ]
Post subject:  Re: 6 step bowl
First tutorial here sallyanne? If so congratulations. :clap
I'll post it to the Gimp Chat Tutorials Index on my next update.
Author:  sallyanne [ Wed Mar 16, 2016 9:11 pm ]
Post subject:  Re: 6 step bowl
OMG - can't get away from the glass? Nice work. Have you tried the other shapes with those patterns yet?
Very nice Tran....you even put a drop shadow. I realized I didn't do that.
Thank you Odinbc. Yes my first one.
Dinasset no your not wrong. I did mention though it is up to the person how much if any that they cut off.
Author:  oldmangrumpy [ Wed Mar 16, 2016 9:19 pm ]
Post subject:  Re: 6 step bowl
Sallyanne - Thank you, and I thought you would never asl about the other shapes ...

Image

Image
Author:  dinasset [ Wed Mar 16, 2016 9:44 pm ]
Post subject:  Re: 6 step bowl
excellent, OMG
Author:  Pat625 [ Wed Mar 16, 2016 10:48 pm ]
Post subject:  Re: 6 step bowl
Everyone: What beautiful and artistic bowls all of you have made! I really need to do this tut, must make the time as it all looks so nice. Trouble is, I really have to work at it to meet the standard set by all of you!!
Author:  Pat625 [ Thu Mar 17, 2016 5:19 pm ]
Post subject:  Re: 6 step bowl
Well, another tale of woe!. I almost was finished with my attempt last night, saving it several times as I worked (so I thought). Suddenly I got some type of error that "no memory was allocated" and froze the computer. I waited but could not get out of it. I had to turn off my computer and wait awhile. Of course, when it booted back up. I found that nothing I worked on had been saved! First time for that one! Today, so far, all is well. I'm trying to get everything I really want copied to an external drive so my computer can visit the Geeks Squad for awhile. I re did my attempt today.
Attachment:
'MIC Stem Cup.png
'MIC Stem Cup.png [ 1.33 MiB | Viewed 4126 times ]
Author:  Dalia [ Thu Mar 17, 2016 7:10 pm ]
Post subject:  Re: 6 step bowl
My first bowl! When I was finished I actually thought it looked like a mortar (now I need a pestle). Thank you for the tutorial. Beautiful results everyone. oldmangrumpy, that black one is gorgeous.

Image

Image
Author:  Pat625 [ Thu Mar 17, 2016 11:23 pm ]
Post subject:  Re: 6 step bowl
I really like those bowls, Dalia. Very nice.
Author:  oldmangrumpy [ Thu Mar 17, 2016 11:54 pm ]
Post subject:  Re: 6 step bowl
Dalia - thank you, I appreciate your comment and I like the way you engraved your bowl.

For those who like black/silver ...

Image

... and those who like gold ...

Image
Page 1 of 5 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/