GIMP Chat http://gimpchat.com/ |
|
Mapping Text To Sphere (2 Methods) http://gimpchat.com/viewtopic.php?f=23&t=9274 |
Page 1 of 1 |
Author: | he4rty [ Sat Dec 14, 2013 11:48 am ] |
Post subject: | Mapping Text To Sphere (2 Methods) |
![]() In this tutorial we will be looking at two methods that can be used to map text onto a sphere, I'd just like to add that these are not my ideas, what you'll be reading is how I have interpreted others thoughts and methods into Gimp. Method 1. This is the more traditional method and one which I have shared before but never in tutorial form, so some of you may know this technique already. Method 2. This has come about because I have been researching "equirectangular images" although I have not been able to create a whole sphere yet, I have managed to map one face. So this second method although a bit more involved will cover this technique. Personally, I prefer the second method but do understand it will be a matter of preference as to which you will prefer and think looks the best. I will be using Gimp 2.8.8 for this tutorial but due to the filters being used it should cover a range of gimp installations. Method 1 & 2 This part of the tutorial is required for both methods. 1. Open Gimp and go New>Image, Create an image of 512px * 512px, you can create any size you would like but it needs to be a square canvas. 2.Go View and make sure "Show Guides" and "Snap to Guide" are ticked, if not just click on the phrase to tick. Go Image>Guides>New Guides (by percent) and add horizontal and vertical guides at 25%, 50% & 75%. ![]() 3. Set background colour to Black (000000) and set foreground colour to White (ffffff) then select the Blend Tool ![]() ![]() 4. Set foreground colour to Blue Violet (8a2be2), Then go Layer>New Layer, rename layer to "Sphere Colour" and check "Foreground Colour", click OK. ![]() 5. Next we're going to enter our text but before we do I just want to mention something important. The square canvas will map around the complete sphere, so part of our image will be hidden when mapped as this will be at the back of the sphere, to make sure we don't lose any text we will need to make sure that the text is kept within the red shaded area below. ![]() 6. Set foreground colour to Green (75d41d) and select the Text Tool ![]() ![]() 7. Go>Layer>Autocrop Layer, then select the Move Tool ![]() ![]() 8. Go>Layer>Layer to Image Size, then go Layer>duplicate Layer. Click the "Eye Icon" to turn off our original text layer and then select the duplicate layer. Now the two tutorials will split, so follow the next steps for Method 1 or skip Down to Step 12 for Method 2. Method 1 9. Go>Layer>Scale Layer and unlock the chain link by clicking on it, Then change width to 256px or half the size of your original canvas, Click OK. Next right click in layers dialogue and select "New from Visible". Select this new layer. ![]() 10. Go>Map>Map Object and change settings to those shown Below and click OK. ![]() 11. That's the first sphere completed, just click the Eye Icon to turn off the text layer and the sphere colour layer. ![]() Method 2 12. If you have followed method 1 then you will need to turn off your newly created sphere layer and switch back on the sphere colour layer and your original text layer. Select the text layer. 13. Go Filter>Distort>Polar Coordinates and use the settings shown below, then go Layer>Transform>Flip Horizontally. ![]() 14. Go>Layer>Scale Layer and unlock the chain link by clicking on it, Then change height to 256px or half the size of your original canvas, Click OK. Select the Move Tool ![]() ![]() 15. Go>Map>Map Object and change settings to those shown Below and click OK. ![]() 16. That's the second sphere completed, just click the Eye Icon to turn off the text layer and the sphere colour layer. ![]() These techniques don't have to stop at just text, images can be mapped as well, so long as you keep within the red square as mentioned earlier. Here is an example of a Rubic cube I made and have mapped to the sphere. ![]() Happy Gimping. Hearty. |
Author: | fluffybunny [ Sat Dec 14, 2013 5:00 pm ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Thanks for sharing your research. ![]() |
Author: | Erisian [ Sat Dec 14, 2013 5:02 pm ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Thank you he4rty. This kind of thing is always useful. |
Author: | he4rty [ Sat Dec 14, 2013 11:57 pm ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Fluffy, Erisian - Thanks for the comment. Conbagui - thanks for the little tip, I normally scale using this method but couldn't think how to explain it in the tutorial so went the other way. |
Author: | GnuTux [ Sun Dec 15, 2013 12:40 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Thanks, he4rty. I used the 1st method and it works well. Easy breezy! ![]() ![]() ![]() ![]() |
Author: | he4rty [ Sun Dec 15, 2013 3:04 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Nice one tux, like the last image with the grid background as well. |
Author: | sallyanne [ Sun Dec 15, 2013 3:37 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
Thankyou He4rty. |
Author: | PhotoComix [ Fri Jan 03, 2014 7:19 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
I think you will like also Mathmap Animated sphere, "animated because wrap better then the others (in MM there is also Distort/Sphere and Map> Sphere, ) equirectangular images if you set frames = 1 , you will got a still image hummn i can't find quickly examples with rectangular images , only with pattern ![]() Xspheric (on Black) by PhotoComiX, on Flickr And even if written to create something else (ellipsoids ) there is another cool filter that may create (sort of ) spherical projection: "Rectangle to Ellipsoid" if the image ratio is different from 1:1 does ellipsoids if is 1:1 does does sort of spheres ![]() a Glimpse on ElseWhere by PhotoComiX, on Flickr |
Author: | K1TesseraEna [ Fri Jan 03, 2014 12:27 pm ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
These are good methods he4rty. I also had a similar approach here viewtopic.php?f=23&t=6015&hilit=mapping+objects+to+sphere The only problem I have is with Map to Object plugin itself. It hasn't been improved much since version 2.4 and obviously doesn't map well. I don't want to compare gimp's M2O to UV mapping in 3d applications (those are simply amazing) but even gimp's commercial counterparts are light-years ahead in this department. |
Author: | he4rty [ Sat Jan 04, 2014 3:29 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
PhotoComix wrote: I think you will like also Mathmap Animated sphere, "animated because wrap better then the others (in MM there is also Distort/Sphere and Map> Sphere, ) equirectangular images if you set frames = 1 , you will got a still image hummn i can't find quickly examples with rectangular images , only with pattern [ Image ] Xspheric (on Black) by PhotoComiX, on Flickr And even if written to create something else (ellipsoids ) there is another cool filter that may create (sort of ) spherical projection: "Rectangle to Ellipsoid" if the image ratio is different from 1:1 does ellipsoids if is 1:1 does does sort of spheres [ Image ] a Glimpse on ElseWhere by PhotoComiX, on Flickr Nice images and thanks for the info, tried installing mathmap once but didn't get very far so maybe its time to try again. |
Author: | PhotoComix [ Sat Jan 04, 2014 3:45 am ] |
Post subject: | Re: Mapping Text To Sphere (2 Methods) |
If you like mapping is a excellent tool But in case take care of a not obvious detail, Mathmap support supersamplig that greatly enhanced the quality . Alas for some reason "supersampling " is switched off by default so you should remember to mark its box (it is close to the preview window) ...if not render quality become similar to that of Map Object, with Supersampling on there is a jump. Render time is more or less the same so seems no reason to deactivate Supersampling , but instead the option is off has to be manually switch on at each session |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |