GIMP Chat http://gimpchat.com/ |
|
Tree bark (Script) http://gimpchat.com/viewtopic.php?f=9&t=10525 |
Page 3 of 5 |
Author: | RJKD [ Tue Aug 23, 2016 3:27 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
That's a cracking background image Pat. |
Author: | Pat625 [ Tue Aug 23, 2016 6:29 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
RJKD: Thank you. I like this filter. I must improve my art work, I never could draw!). Attachment: Tree Bark 2.jpg [ 2.82 MiB | Viewed 3984 times ] Tran: There must be a lot of other things we can do with this script besides trees (although I love them dearly.) I must think on this. |
Author: | Rashid [ Wed Apr 26, 2017 9:54 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Hi There, I am trying to use the script but I get error for 'inner glow effect' . I even changed the layerfx.py but not success. I have seen same error in the case of other users. Is it a bug or some technicality in the script? Thanks |
Author: | Rod [ Thu Apr 27, 2017 11:15 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Rashid wrote: Hi There, I am trying to use the script but I get error for 'inner glow effect' . I even changed the layerfx.py but not success. I have seen same error in the case of other users. Is it a bug or some technicality in the script? Thanks The script is working fine for me in GIMP-2.8.20 64 bit. Are you using the correct layerfx.py? There are two layerfx-2.8.py and layerfx.py you want "layerfx.py" http://gimpscripts.com/2011/10/gimp-layer-effects/ layerfx-2.8.py is notorious for not working with scm filters as it uses layer groups. |
Author: | Rashid [ Thu Apr 27, 2017 9:09 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Hi Rod, Thanks. No error after replacing the plug-in. Should I keep both versions in the gimp plug-in folder or delete layerfx-2.8? Can they coexist together and perform when and where required individually? Thanks. |
Author: | Rod [ Fri Apr 28, 2017 2:32 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Rashid wrote: Hi Rod, Thanks. No error after replacing the plug-in. Should I keep both versions in the gimp plug-in folder or delete layerfx-2.8? Can they coexist together and perform when and where required individually? Thanks. I never had them both together in the plug-ins folder but if they both open and work individually you should be fine. |
Author: | Nini [ Tue Nov 13, 2018 11:35 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Ok so found this great tutorial from you just now, however the gimp registry link is no longer active, I seem to have a hard time locating the script you are using. Any chance you can post the updated link? thanks for your hard work. I should point out I am using windows 7 and newest release of gimp Vs 2.10.6 Found someone that had posted the plug in, ut cant get it to work and even when I am trying to use tree bark plug in I get an error here is a screen shot of the errors I got http://prntscr.com/lhxi0g |
Author: | Pocholo [ Thu Nov 15, 2018 1:45 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Nini wrote: Ok so found this great tutorial from you just now, however the gimp registry link is no longer active, I seem to have a hard time locating the script you are using. Any chance you can post the updated link? thanks for your hard work. I should point out I am using windows 7 and newest release of gimp Vs 2.10.6 Found someone that had posted the plug in, ut cant get it to work and even when I am trying to use tree bark plug in I get an error here is a screen shot of the errors I got http://prntscr.com/lhxi0g Hi nini. I found @ deviantart.com the original tutorial for this by Conbagui, here is the link: http://fav.me/d7ud3h4. |
Author: | lylejk [ Fri Nov 16, 2018 8:45 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
I must have been busy when this one came out since I don't recall seeing this thread. Cool stuff. May download the script later and play (but it is my weekend (full-time job) and my part-time job will occupy me most of next week unfortunately). Anyway, thanks for the info and script links Tran/Conbagui. ![]() edit: And from the looks of things, since GIMPScripts is no longer, it may be a bit difficult to hunt down all the required stuff to run the script. May try to do so later. Still, some cool results; I bet there's more than one way to skin a cat. Possibly run an alpha to logo and then using a bark texture with displacement and merge. May try to go that route since I'm a lazy bstard and it will be trying to find all the things needed to run Tran's script. We shall see. ![]() |
Author: | Pocholo [ Fri Nov 16, 2018 11:28 am ] | ||
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) | ||
lylejk wrote: I must have been busy when this one came out since I don't recall seeing this thread. Cool stuff. May download the script later and play (but it is my weekend (full-time job) and my part-time job will occupy me most of next week unfortunately). Anyway, thanks for the info and script links Tran/Conbagui. ![]() edit: And from the looks of things, since GIMPScripts is no longer, it may be a bit difficult to hunt down all the required stuff to run the script. May try to do so later. Still, some cool results; I bet there's more than one way to skin a cat. Possibly run an alpha to logo and then using a bark texture with displacement and merge. May try to go that route since I'm a lazy bstard and it will be trying to find all the things needed to run Tran's script. We shall see. ![]() The only thing you need is to have Layerfx.py installed and the Bark textures. If you don't have them, here I uploaded a copy to use with 2.10 version. I hope this can help you Lyle
|
Author: | trandoductin [ Fri Nov 16, 2018 11:55 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
I just updated the scm for 2.10 and tested. https://www.gimplearn.net/viewtopic.php ... e_bark.zip |
Author: | rich2005 [ Fri Nov 16, 2018 12:09 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
The old script worked ok for me see: https://www.gimp-forum.net/Thread-Can-t ... 9#pid11429 Am sure the new version is even better ![]() |
Author: | trandoductin [ Fri Nov 16, 2018 12:46 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
The old version worked for me too but I just ran it through GIMP20 constantize plugin just in case other GIMP 2.10 people have problem with constant names... I notice in the past many scripts worked for my 2.10 doesn't work on other's 2.10's. Not sure why. |
Author: | Pat625 [ Fri Nov 16, 2018 12:53 pm ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Thanks again for updating the script, Tin. |
Author: | lylejk [ Sat Nov 17, 2018 8:04 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
Pocholo wrote: lylejk wrote: I must have been busy when this one came out since I don't recall seeing this thread. Cool stuff. May download the script later and play (but it is my weekend (full-time job) and my part-time job will occupy me most of next week unfortunately). Anyway, thanks for the info and script links Tran/Conbagui. ![]() edit: And from the looks of things, since GIMPScripts is no longer, it may be a bit difficult to hunt down all the required stuff to run the script. May try to do so later. Still, some cool results; I bet there's more than one way to skin a cat. Possibly run an alpha to logo and then using a bark texture with displacement and merge. May try to go that route since I'm a lazy bstard and it will be trying to find all the things needed to run Tran's script. We shall see. ![]() The only thing you need is to have Layerfx.py installed and the Bark textures. If you don't have them, here I uploaded a copy to use with 2.10 version. I hope this can help you Lyle Thanks, Pocholo. I'll eventually check this one out. ![]() |
Author: | lylejk [ Sat Nov 17, 2018 8:06 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
trandoductin wrote: I just updated the scm for 2.10 and tested. https://www.gimplearn.net/viewtopic.php ... e_bark.zip Appreciate that too, Tran; just downloaded your Script-fu as well. ![]() |
Author: | lylejk [ Tue Nov 20, 2018 12:24 am ] | ||
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) | ||
OK; finally installed everything and placed files where they belonged (lol). Here's my play. Thanks a heap again. ![]()
|
Author: | gimper66 [ Wed Jun 05, 2019 6:26 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
I WANT TO MAKE THE TREE BARK STRUCTURE BUT I ALWAYS GET THIS ERROR MESSAGE. however I have followed all associated instructions for gimp 2.10 Tree_bark Script for GIMP 2.10. Instructions: 1. Put "layerfx.py" in your GIMP's /plug-ins/ folder 2. Put "Tree_bark.scm" in your GIMP's /scripts/ folder 3. Put "Mossy bark texture.jpg" in your GIMP's /patterns/ folder 4. Put "mossy bark te texture gray.jpg" in your GIMP's /patterns/ folder 5. Restart GIMP. 6. Open "Blurred Forest background.jpg". 7. Create new blank layer on top and draw some art/text. 8. Run script (Script-Fu/Alpha-to-Logo/Tree bark). 9. Click OK to run gimper ![]() ![]() ![]() |
Author: | trandoductin [ Wed Jun 05, 2019 8:20 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
looks like you don't have layer effects installed. |
Author: | gimper66 [ Wed Jun 05, 2019 8:33 am ] |
Post subject: | Re: Tree bark (tutorial by conbagui) (Script) |
trandoductin wrote: looks like you don't have layer effects installed. layer effects that is what I still miss,can you sometimes deliver that to me, and also tell me where to install it because I'm not that handy in those things. |
Page 3 of 5 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |