Hi level_10, I think you have to download the script Pat attached in post#4

https://gimplearn.net/viewtopic.php?t=478&p=2852#p2852

Hope you can solve your problem with that

Ella

I put the gimpfu.py in the plugins folder, open Gimp, then Filters / Script-Fu / update the scripts but still the same if I do File / Create / Logos (Gimpchat) / Bevel Reflect logo...

Hello Level O
This is how I get BRL scrolling to work in Windows 10 and Gimp 2.10.6
Use the package supplied by Gimper 66. or Rich 2005. They both have the scrolling script from 2014. Install everything. Make sure BRL is also in Preferences. It looks as though you have already made it that far.
Open a new canvas in Gimp.
Go to File./Create/Logo/Bevel Reflect Logo
Place the mouse on the very top of the BRL box. there should be a two headed arrow.
Holding down left side of mouse, drag downwards.
The BRL box will resize, showing the bottom O.K. etc. scrolling bars should be visible.
Hope this helps. Regards.

I can only confirm.

I use exactly the same files as those in Rich2005 in post # 4 and it, for me,works very well for Gimp-2.10.12_Portable-64bit-Win-V2 i Gimp-2.10.12 (gimp.org setup3).

You have a lot of Gimp versions (me too) and sometimes it's easy to mistake file locations.
If you feel like it:
- check the correct location of scripts and plugins in preferences,
- look for potential duplicate scrip-fu.exe in the plug-ins location,
- tell me when he stayed only one script-fu "bevel-reflect-logo.scm" could you run it and had a scroll bar?


The modified script-fu.exe files add a scroll bar to scripts [* .scm] and gimpfu.py to plugins [* .py] and its location is:
... \lib\gimp\2.0\python\gimpfu.py.

Thank you for the files.

Do you have the source code for MLBevelReflect version 2, or if later, the latest one to use with bevel-reflect-logo.scm? I'm on Linux so do not have an appropriate executable and would prefer to compile it myself in any case.

The only source code I can find is an earlier version here:
https://github.com/vaifrax/MLBevelReflect

but my understanding from this post:
viewtopic.php?f=9&t=9968#p130251

is that will not work with bevel-reflect-logo.scm which requires ML Bevel Reflect Version 2.

I'm wanting it to work with Gimp 2.10.10.

Many thanks.

That got the memory working MLbevelreflect version 2 comes from GnuTux and the now defunct gimpscripts site.

You can still find it on the web archive https://web.archive.org/web/20150319194 ... l-reflect/

In case of problems attached.

Compiles ok here Gimp 2.10.12 / kubuntu 18.04 As might be expected, throws up many deprecated warnings but is very quick. A straight gimptool-2.0 --build MLBevelReflect.c works, nothing clever required.

Much appreciated, thank you. On initial tryouts it seems to be working fine.

I had to give up the PC sometime.

@MareroQ: I'm not mistaken for file locations
@ P1937: it does not work

To be clear and be sure that I do not start a neurological disease, I started again and always the same, ie:

1) by File / Create, on the one hand I no longer have my display with other logos (see screenshot "before" and "after") and on the other, unable to resize the window to have the buttons.





2) by Filters / Alpha to logo, it works but see screenshots "before" and "after":





So I give up this topic because I will use this Bevel with Menu / Filters / Alpha to logo and after removing the script-Fu.exe from rich2005 (173 KB) and handed the script_Fu.exe 201 KB.

Thank you to all participants
I consider the problem solved (even if it is not really)

I honestly do not know what you have done / what you installed / un-installed / replaced or what?

Solutions work for others but not for you. Does not matter. Do not despair, there is always another solution.

This has been mentioned before somewhere in the forum the ALT-DRAG utility. https://stefansundin.github.io/altdrag/

This allows you to drag a large window up for access.

Here is a demo: Installation and usage. Normally uses the ALT key + left-mouse combination - for various reasons I reconfigured to using Win key + left-mouse. All shown in the demo.

https://youtu.be/VKVNSarECEo Duration 2' 30"

I compiled script-fu.exe for you with Gimp 2.10.13 - can you try last time? (for me it also works with Gimp 2.10.12 with gimp.org and the version Samj and Parth - but it is not certain that it will work for you - because the old version compiled by Pogogo - for me still works and unfortunately not for you).

ps. After unpacking the zip - you can delete the src directory (source code).

MareroQ, thank you very much for doing this for me, I will try again tomorrow because now I have come to hate this filter and I wish I could have a good night!

Edit:


MareroQ,I use samj Gimp 2.10.13 and samj Gimp 2.10.12

Hello Level O
Just one last try.
My post #14 and MareroQ post #15. We both agreed on a plug-in.
Now having looked at your screen shots the following maybe the solution.
When using BRL from File/Create/Logos/BRL - it works O.K.
However when using from Filters/Alpha to Logo/BRL. We must make sure we have added an Alpha Channel to any image we wish to work with.
In other words, in the Layers section, right click on the image, click - Add Alpha Channel. Then go to Filters/Alpha to Logo/Bevel Reflect Logo. Place the mouse on the top of the white bar and pull down slightly. The scroll bar should now show, plus all tabs at the bottom of the screen.
this should now work. Here's hoping.
Using: Windows 10 Pro, 64 bit, Gimp 2.10.12

Hello - further update
thank you MareroQ for the new Scrolling bar. Have tried this out. It does not "knock out" the animation filters like the previous one I had to use version 2014.

Level O you will still need to use an Alpha Channel on any images to use BRL in filters/Alpha to logo, when using this new plug-in.
Thank you once again MareroQ

to all

@ P1937:Thank you for trying to help me ..My Gimp have been set for a long time in Preferences to put an alpha channel.

@ MareroQ:
I just made the change in samj Gimp 2.10.13 and it works!




NB: Before starting the script-Fu replacement, I found that the "debug" file that was in D: \ Gimp-2.10.13_Portable-32-64bit-Win-V2 \ lib \ gimp \ 2.0 \ plug-in ins \ script-fu was gone.
EDIT:
Thank you all for your help