It is currently Mon Nov 16, 2026 2:41 am


All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Is it better to crop an image or to rescan?
PostPosted: Sat Dec 11, 2010 11:11 pm  (#1) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
I am still trying to wrap my head around the whole image/print resize/scale thing. One thing that really confuses me is this. I have an image scanned from a 6x8 inch negative. It comes out as about a 122 mg file. Now, I crop it down to take an image out of the center of it, approx half of the original image. Then I scale it back up to the original size. That derived image suddenly comes out to 450 mg. Huh?

I guess, from what I've read, that this has to do with lessening the number of dpi, but I do not understand it.

So, hopefully someone can help me understand this. But aside from understanding it I wonder if I would be better off to, instead of cropping and resizing, maybe I should rescan the negative and focus on the desired portion. The reason this is an issue is that when I try to open the 450 mg file my computer can't deal with it and appears to freeze up. Or at least it is in a comatose state for longer than 20 minutes. I then get disgusted and hit the reset button.

Suggestions?


Share on Facebook Share on Twitter Share on Orkut Share on Digg Share on MySpace Share on Delicious Share on Technorati
Top
 Post subject: Re: Is it better to crop an image or to rescan?
PostPosted: Sat Dec 11, 2010 11:27 pm  (#2) 
Offline
GimpChat Member

Joined: Apr 12, 2010
Posts: 5870
which format you use to save, tiff?

_________________
My 3D Gallery on Deviantart http://photocomix2.deviantart.com/
Main gallery http://www.flickriver.com/photos/photocomix-mandala/
Mandala and simmetry http://www.flickriver.com/photos/photocomix_mandala/

Image

Mrs Wilbress


Top
 Post subject: Re: Is it better to crop an image or to rescan?
PostPosted: Sat Dec 11, 2010 11:40 pm  (#3) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
I'm saving in .png


Top
 Post subject: Re: Is it better to crop an image or to rescan?
PostPosted: Sun Dec 12, 2010 12:13 am  (#4) 
Offline
GimpChat Member
User avatar

Joined: Jul 04, 2010
Posts: 2253
Location: Retired Moderator Slowly Returning to the Living.
I recommend re-scanning the image. Cropping the image isn't much of an issue, but resizing it (bigger or smaller) always reduces image quality. Sometimes more than others.

Regardless of filesize or compression choices, I almost always scan the image twice. Once at a higher resolution, getting the whole image. This I store away in case something happened to the original. I then scan the image at the crop I want, or as close to it as possible.

I have also found that when enlarging an image makes the image quality drop more than I want, printing the image at it's highest resolution and then scanning the printed image at a very high resolution (dpi), can often times yield much better results. It sounds counter-intuitive, but it really does work.

_________________
Artists aren't crazy! We're eccentric! ~G.M. Ross

Image

My Sigs = My Photos
Check out my work at http://www.flickr.com/photos/photomastergreg.


Top
 Post subject: Re: Is it better to crop an image or to rescan?
PostPosted: Sun Dec 12, 2010 1:00 am  (#5) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5243
Location: Gimpville
sofasurfer wrote:
I am still trying to wrap my head around the whole image/print resize/scale thing.

Greetings sofasurer,

The way I approach scanning and printing is to consider the native resolution of the printer, along with the resolution I plan to use when printing. What resolution do you plan to use when printing the scanned image?

For the sake of argument, let's assume your printer prints at 600dpi and that's what you use for the best results. You have a 6"x8" image. Suppose you wanted to scan and print the image at its original size of 6"x8". Since you plan on printing at 600dpi, you would need to scan at 600dpi. Since your scanner and printer are both set to the same resolution, the size in inches of the scans and the size in inches of the prints are the same. If you scan a 6"x8", you print a 6"x8".

Now, suppose you have a 4"x5" image and you want to print at 8"x10". You simply scan the image at 1200dpi and print. Because you scanned a 4"x5" document at 1200di and you print at 600dpi, you get a 8"x10" printout, which is twice as large.

If I have a 6"x8" image and I want to crop half of it away but I still want my final print to be 6"x8", I'd scan at 1200dpi, crop and print. It would normally print twice as large because I scanned at 1200dpi but since I cropped half of it away, I'm back to the original size of 600dpi or 6"x8" when printed.

The goal is to not scale the image up (or down for that matter) with GIMP but to scan based on resolution of your printer. Scaling up or down in software will degrade the image and result in a more pixelated final print out. 1200dpi or 1440dpi are standard printing resolutions. You'll need to determine what resolution you'll be printing with. Your scan resolution should be based on that (and the desired size of the final print out).

A PC monitor's resolution is around 72dpi, so if you scan a 6"x8" document at 1200dpi, it's gonna be huge on the screen at 72dpi. I just zoom in and out in GIMP when working on a large document destined for photo quality printing.

Hope that helps some!!

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Is it better to crop an image or to rescan?
PostPosted: Sun Dec 12, 2010 2:36 am  (#6) 
Offline
GimpChat Member
User avatar

Joined: Sep 24, 2010
Posts: 12862
For photos, you really don't need that high of a resolution. The old Fuji chemical printers use to use 254dpi and that's pretty much what my goal for photos is (for the inch size I need, I choose inches times 254dpi where I can. My personal scanner doesn't give me this fine control, so I scan at 300dpi). Now, if you want to print vector graphics, you need to print at the highest quality possible to reduce stairstepping (aliasing). Photos are more forgiving of course. Still I choose the fine quality setting for printing them too. Scanner vector art, you really need to scan at a higher rez, but then you have size constraint issues too (i.e., large file size verses quality). I would probably scan a graphic at 600 dpi. There is a point where a higher rez really don't make sense anymore.

Just as a side note, I appreciate that you honored your bet Tux. Also, Cam won the Heisman so happy I am too. :)

_________________
Lyle

Psalm 109:8

Image


Top
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]



* Login  



Powered by phpBB3 © phpBB Group