Gradient Stroke Script V1.5

GnuTux · **Posted:** Fri Oct 09, 2020 8:04 pm **(#121)**

I wanted to make sure this script was available, as gimpscripts.com is currently inactive. I've tested it using GIMP 2.10.20.

Gradient Stroke V1.4

mahvin · **Joined:** Oct 06, 2010 **Posts:** 4050

GnuTux, you want access to gimpscripts.net to add scripts? I also have people adding the scripts to my server to host (URL direct) them to the site, just in case. Some are just linked back to Gimpchat, etc.

GnuTux · **Posted:** Fri Oct 09, 2020 10:40 pm **(#123)**

mahvin wrote:

GnuTux, you want access to gimpscripts.net to add scripts?

That would be cool. Thanks, mahvin. I want to ensure I'm not adding duplicate updates to GIMP 2.10.. There are various updates to my scripts from different coders floating around and I don't want to confuse the issues.

mahvin · **Joined:** Oct 06, 2010 **Posts:** 4050

Will your gimpscripts.com email still work?

Krikor · **Joined:** Dec 19, 2018 **Posts:** 158

GnuTux wrote:

I wanted to make sure this script was available, as gimpscripts.com is currently inactive. I've tested it using GIMP 2.10.20.

Hi,
I downloaded and installed the version found in the first post #1 V1.4. But on my Gimp 2.10.21 Win10 64 I get error messages. :roll:

Erisian · **Posted:** Sat Oct 10, 2020 11:51 am **(#126)**

Working on Portable Apps 2.10.21 - Win7 64.

Thanks Tux. :hi5

oldmangrumpy · **Posted:** Sat Oct 10, 2020 2:36 pm **(#127)**

I get the same error message as Krikor (post #125 above), on Windows 10 64 bit with Gimp 2.10.20

mahvin · **Joined:** Oct 06, 2010 **Posts:** 4050

Krikor wrote:

GnuTux wrote:

I wanted to make sure this script was available, as gimpscripts.com is currently inactive. I've tested it using GIMP 2.10.20.

Hi,
I downloaded and installed the version found in the first post #1 V1.4. But on my Gimp 2.10.21 Win10 64 I get error messages. :roll:

oldmangrumpy wrote:

I get the same error message as Krikor (post #125 above), on Windows 10 64 bit with Gimp 2.10.20

If you open the scm file, just replace "CUSTOM" with the number "3". Problem solved.

Erisian · **Posted:** Sat Oct 10, 2020 6:33 pm **(#129)**

mahvin wrote:

Krikor wrote:

GnuTux wrote:

I wanted to make sure this script was available, as gimpscripts.com is currently inactive. I've tested it using GIMP 2.10.20.

Hi,
I downloaded and installed the version found in the first post #1 V1.4. But on my Gimp 2.10.21 Win10 64 I get error messages. :roll:

oldmangrumpy wrote:

I get the same error message as Krikor (post #125 above), on Windows 10 64 bit with Gimp 2.10.20

If you open the scm file, just replace "CUSTOM" with the number "3". Problem solved.

Was it just a Win10 thing?

Krikor · **Joined:** Dec 19, 2018 **Posts:** 158

mahvin wrote:

If you open the scm file, just replace "CUSTOM" with the number "3". Problem solved.

@Mahvin,
After replacing CUSTOM with number 3, it still gives an error, this time:

Attachment:

GradientStroke03.png [ 11.55 KiB | Viewed 1123 times ]

Thank you for your help.

dinasset · **Posted:** Sun Oct 11, 2020 12:03 am **(#131)**

In Samj's version it works (once corrected the "CUSTOM"), because it runs by default in compatibility mode.
Parameters should be all adjusted to 2.10 rules if not in compatibility.

mahvin · **Joined:** Oct 06, 2010 **Posts:** 4050

Krikor wrote:

mahvin wrote:

If you open the scm file, just replace "CUSTOM" with the number "3". Problem solved.

@Mahvin,
After replacing CUSTOM with number 3, it still gives an error, this time:

Attachment:

GradientStroke03.png

Thank you for your help.

LINEAR is 0 (Zero)

sallyanne · **Posted:** Sun Oct 11, 2020 1:19 am **(#133)**

Works for me without changing anything

Krikor · **Joined:** Dec 19, 2018 **Posts:** 158

dinasset wrote:

In Samj's version it works (once corrected the "CUSTOM"), because it runs by default in compatibility mode.
Parameters should be all adjusted to 2.10 rules if not in compatibility.

Dinasset, since I started using Gimp, always and only used portable versions of Samj, including this one; Samj's 2.10.21

mahvin wrote:

If you open the scm file, just replace "CUSTOM" with the number "3". Problem solved.

LINEAR is 0 (Zero)

Mahvin, now! After the changes from CUSTOM to 3 and LINEAR to 0, it seems that the script is moving forward. Thx a lot.

Attachment:

gRAsTROK.png [ 278.57 KiB | Viewed 2029 times ]

It would be good if there was a post with the list of words for proper conversion, containing in addition to CUSTOM = 3; LINEAR = 0; all the others.

Now I will try to understand how this script works, fun ahead.

mahvin · **Joined:** Oct 06, 2010 **Posts:** 4050

Krikor wrote:

It would be good if there was a post with the list of words for proper conversion, containing in addition to CUSTOM = 3; LINEAR = 0; all the others.

Now I will try to understand how this script works, fun ahead.

There is. It's in the procedure browser under "Help". You just have to look up the procedure and check. For instance, "gimp-edit-blend" for CUSTOM error, and "plug-in-bump-map" for LINEAR error.

mackenzieh · **Posted:** Sun Oct 11, 2020 8:57 pm **(#136)**

I tried using this script and I received an error. I am using windows 10 gimp 2.10.22.

Graechan · **Posted:** Sun Oct 11, 2020 9:40 pm **(#137)**

no problems in the script just go to gimp-edit-blend and change CUSTOM to BLEND-CUSTOM or 3 as per below

Code: Select all

(gimp-edit-blend        ; Blend (Gradient)
                        stroke-layer ; Drawable - (The affected drawable)
                        BLEND-CUSTOM ; Int32 - Blend Type (FG-BG-RGB-MODE (0))
                        paint-mode   ; Int32 - Paint Mode (NORMAL-MODE (0))
                        blend-shape  ; Int32 - Gradient Type (LINEAR (0))
                        100          ; Float - Opacity (0 - 100)
                        blend-offset ; Float - Offset ( >= 0)
                        blend-repeat ; Int32 - Repeat (NONE (0))
                        rev-gradient ; Int32 - Reverse (TRUE or FALSE)
                        TRUE         ; Int32 - Supersample (TRUE or FALSE)
                        3            ; Int32 - Supersampling Recursion  Dept (1 - 9)
                        0.25         ; Float - Supersampling threshold (0 <= 4)
                        TRUE         ; Int32 - Dither (TRUE or FALSE)
                        xblend-start ; Int32 - X Blend Starting Point
                        yblend-start ; Int32 - Y Blend Starting Point
                        xblend-end   ; Int32 - X Blend Ending Point 
                        yblend-end   ; Int32 - Y Blend Ending Point
             ) ; End Blend

teapot · **Joined:** Dec 09, 2018 **Posts:** 656

Thank you for the script GnuTux :jumpclap

mackenzieh · **Posted:** Mon Oct 12, 2020 12:53 am **(#139)**

Graechan wrote:

no problems in the script just go to gimp-edit-blend and change CUSTOM to BLEND-CUSTOM or 3 as per below

Code: Select all

(gimp-edit-blend        ; Blend (Gradient)
                        stroke-layer ; Drawable - (The affected drawable)
                        BLEND-CUSTOM ; Int32 - Blend Type (FG-BG-RGB-MODE (0))
                        paint-mode   ; Int32 - Paint Mode (NORMAL-MODE (0))
                        blend-shape  ; Int32 - Gradient Type (LINEAR (0))
                        100          ; Float - Opacity (0 - 100)
                        blend-offset ; Float - Offset ( >= 0)
                        blend-repeat ; Int32 - Repeat (NONE (0))
                        rev-gradient ; Int32 - Reverse (TRUE or FALSE)
                        TRUE         ; Int32 - Supersample (TRUE or FALSE)
                        3            ; Int32 - Supersampling Recursion  Dept (1 - 9)
                        0.25         ; Float - Supersampling threshold (0 <= 4)
                        TRUE         ; Int32 - Dither (TRUE or FALSE)
                        xblend-start ; Int32 - X Blend Starting Point
                        yblend-start ; Int32 - Y Blend Starting Point
                        xblend-end   ; Int32 - X Blend Ending Point 
                        yblend-end   ; Int32 - Y Blend Ending Point
             ) ; End Blend

I tried changing custom to blend-custom and then 3 when blend-custom didn't work and I still get the error.

GnuTux · **Posted:** Mon Oct 12, 2020 1:33 am **(#140)**

Thanks to "everyone" who tested, found bugs and updated code. :mrgreen:

I didn't have the errors others had with GIMP 2.10.20-1 and wasn't sure why. I thought the only thing that might be different was that I was still using Scrolling Interface Mod V1.1, and it turned out that was why it worked for me without error. I actually figured it would be the other-way round and Scrolling Interface would only "cause" errors, but with 2.10, both could occur.

So, I've updated the script to Gradient Stroke V1.5, which seems to work properly with or without Scrolling Interface Mod V1.1.

Thanks to mahvin & Graechan for coding. :bigthup

; V 1.5
; Update CUSTOM To BLEND-CUSTOM
; Update LINEAR To TRUE

Gradient Stroke V1.5

	Similar Topics	Replies
	Is there a script for doing Stroke outside selection?	4
	Stroke: how to remove space between test & stroke	3
	stroke selection/stroke path	2
	stroke path with pattern	26
	Recalling FPS (Free Paint Stroke)	79