MLBevelReflect plugin (re-discovered)[Updated!]

pirate541 · **Joined:** May 27, 2011 **Posts:** 707

Gnutux
It is saying a lot..would be hard to show it all,it scrolled pages of output.
Most of it says "missing magic header

Thank You for helping

GnuTux · **Posted:** Sat Feb 08, 2014 8:24 pm **(#122)**

pirate541, can you now run ML Bevel Reflect plug-in and copy & paste the output from the command prompt back here?

I would really like to see the entire output you have there. After you run the BR plug-in, see if you copy and paste the full output into a text file and attach the text fie here.

Also, I'm attaching a current, tested and working version of the MLBevelReflect.exe. This plug-in was compiled on Windows7 64bit. If it doesn't work for you, you are problem missing some .dll's, or you have the wrong version of some critical .dll's, and we will need to continue with the troubleshooting until we can determine what you're missing.

GnuTux · **Posted:** Sat Feb 08, 2014 9:33 pm **(#123)**

nixnine wrote:

Try to compile in Ubuntu Studio 13.04. Get this:

A current Linux_x32 binary is now up on gimpscripts.com.

http://gimpscripts.com/2014/01/ml-bevel-reflect/

nixnine · **Posted:** Sat Feb 08, 2014 11:41 pm **(#124)**

Well, still can't get it to compile. How can I use the binary?

GnuTux · **Posted:** Sat Feb 08, 2014 11:58 pm **(#125)**

nixnine, just copy MLBevelReflect (31.9k) to your plug-ins folder.

What message are you getting when you try to compile?

dd · **Joined:** Apr 10, 2011 **Posts:** 532

GnuTux wrote:

@dd -After you got it to compile on Mint (32bit I assume), did it work with GIMP 2.6.x?

No idea, I haven't used 2.6 in years. I said it ships with it, not that I use it... :mrgreen:

dd · **Joined:** Apr 10, 2011 **Posts:** 532

nixnine wrote:

Try to compile in Ubuntu Studio 13.04. Get this:

~/Downloads/MLBevelReflect-master$ make
cc -O3 -Wall -pthread -I/usr/include/gtk-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/lib/i386-linux-gnu/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/harfbuzz -I/usr/include/gimp-2.0 -o MLBevelReflect MLBevelReflect.o -lgimpui-2.0 -lgimpwidgets-2.0 -lgimpmodule-2.0 -lgimp-2.0 -lgimpmath-2.0 -lgimpconfig-2.0 -lgimpcolor-2.0 -lgimpbase-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0
/usr/bin/ld: MLBevelReflect.o: undefined reference to symbol 'atan2@@GLIBC_2.0'
/usr/bin/ld: note: 'atan2@@GLIBC_2.0' is defined in DSO /lib/i386-linux-gnu/libm.so.6 so try adding it to the linker command line
/lib/i386-linux-gnu/libm.so.6: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make: *** [MLBevelReflect] Error 1

What version of GIMP do you have installed?

I'm thinking you probably need to have 2.8 installed, to get the right output from gimptool.

nixnine · **Posted:** Sun Feb 09, 2014 8:26 am **(#128)**

DD: I have 2.8.10 installed.

GT: I copied it into my plugins folder. Should it work like that?

Here is what I get when I try to compile:
Compile error

pirate541 · **Joined:** May 27, 2011 **Posts:** 707

Gnutux

Thank You for the zip file
This one worked but only on 2.10
still not working on 2.8

molly · **Joined:** Apr 07, 2010 **Posts:** 14182

Glad you got it working pirate, this is show and tell week. :teeth

GnuTux · **Posted:** Sun Feb 09, 2014 2:21 pm **(#131)**

pirate541 wrote:

Gnutux

Thank You for the zip file
This one worked but only on 2.10
still not working on 2.8

Glad to hear you got it working, but there is no GIMP 2.10. GIMP 2.10 will be the next release of GIMP.

Can you post the exact version of the one that IS working and the one that is NOT working. You can find the exact version from the menu: Help/About.

Thanks, pirate541.

GnuTux · **Posted:** Sun Feb 09, 2014 3:36 pm **(#132)**

nixnine, Yes, you can just copy that file: "MLBevelReflect" to the plug-ins folder and ML Bevel Reflect should appear under Filters/Map/. You can then use the ML Bevel Reflect Logo Script.

On the compile error, it's looking for libm.so, which requires the -lm switch. The attached Makefile should work. Ensure you remove the old Makefile and replace it with the following.

All you need to do is run make in the folder than contains MLBevelReflect.c & Makefile.

If the make completes: two additional files will be generated: MLBevelReflect.o & MLBevelReflect

Then copy "MLBevelReflect" to your plug-ins folder and ML Bevel Reflect should appear under Filters/Map/.

pirate541 · **Joined:** May 27, 2011 **Posts:** 707

Gnutux
the plugin is working Gimp 2.8.10
2.8.3 is not working

GnuTux · **Posted:** Sun Feb 09, 2014 7:34 pm **(#134)**

Pirate541, I'm not sure why it doesn't work for you in GIMP 2.8.3, but that version is a bit outdated, in terms of the GIMP 2.8.x maintenance release schedule. It's probably a good idea to go ahead and update your GIMP 2.8.3 to GIMP 2.8.10. There have been several changes and bug fixes since the early releases of GIMP 2.8.x.

By the way, you can thank Graechan for that working Win7_x64 executable. :bigthup

Odinbc · **Posted:** Sun Feb 09, 2014 9:07 pm **(#135)**

A bit of an experiment using G'MIC Snowflake, MLBevelReflect and Layer Modes.

I found using Save to Channel before you run MLBevelReflect helpful.

K1TesseraEna · **Joined:** Sep 22, 2012 **Posts:** 2089 **Location:** US

Nice snowflake, Odin!
Armored snowflake! Watch your heads, folks :hehe

SysTemX · **Joined:** Dec 08, 2013 **Posts:** 1088

Odinbc wrote:

A bit of an experiment using G'MIC Snowflake, MLBevelReflect and Layer Modes.

[ Image ]

I found using Save to Channel before you run MLBevelReflect helpful.

Masterpiece Odinbc.

Carlos Diniz · **Joined:** Jan 20, 2013 **Posts:** 590

Nice work, Odinbc.

molly · **Joined:** Apr 07, 2010 **Posts:** 14182

Nice odin

pirate541 · **Joined:** May 27, 2011 **Posts:** 707

Gnutux
ooopsie,Just saw Your post !

Graechan,thank you thank You thank You