It is currently Tue Nov 17, 2026 4:42 pm


All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  [ 41 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 5:38 pm  (#21) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
I am not sure exactly what you guys are asking me to do. :lol

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 5:56 pm  (#22) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Well, my understanding is that when you rebooted your system you received EDID errors, which was fixed when power was cycled on the monitor. Is that correct?

If so, we assume there was corruption on the display side. We don't know why this occurred but since unplugging the monitor fixed it, we know there was corruption and resetting the monitor cleared the corruption.

We also surmised that this might also be related to the limited display resolutions you mentioned that you had. I was wondering if power cycling the monitor with the PC powered off and then booting the PC, allowed the Radeon driver to see all of the higher resolutions.

If so, we know that your configuration is correct but we still don't know what might be causing the intermittent corruption of the display's EDID. Perhaps there is an issue with the display itself or perhaps the PC is sending data to the display that's corrupting the EDID.

I think we need to know if power cycling the monitor with the PC powered off and then booting the PC, allows the Radeon driver to see all of the higher resolutions (You can check the resolutions available under displays after you boot your PC). Can you test that?

Depending on the outcome of that test, we can proceed to finding various solutions that have been suggested. That's where I'm at, anyway. :)

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 5:57 pm  (#23) 
Offline
GimpChat Member
User avatar

Joined: Nov 09, 2011
Posts: 726
GnuTux wrote:
According to the info from lspic -vk Rod posted, the kernel module in use is Radeon.

Just in case I have not explained properly, I'm talking about when you disable KMS with "nomodeset". So I think the driver "vesa" is loaded instead of "radeon". Then, you should specify in xorg.conf the driver to be loaded and monitor resolutions (refresh rates, modelines, etc).
GnuTux wrote:
Actually, you don't even need an xorg.conf in Fedora anymore. I haven't had the need to use an xorg.conf in a long time.

Yes, on any modern distribution is not necessary to configure the xorg.conf.
But I have understood that this is basically because thanks to KMS, that we stop to use with "nomodeset".

_________________
Image
Be patient, English is not my language.


Last edited by YAFU on Mon Aug 20, 2012 6:04 pm, edited 1 time in total.

Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 6:02 pm  (#24) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Ah, I see what you are saying now. I agree that may be an avenue to pursue but I think it might be helpful to have Rod run the test I outlined before we proceed down that path, just to make sure we are on the same page in terms of the problems we are trying to resolve.

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 6:22 pm  (#25) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
So just turn off the PC and unplug and plugin the monitor then re boot the PC correct?
Then i check to see if the display resolution for 1440x900 is working?

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 6:39 pm  (#26) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Yes. After you try that, check under displays to see if you have higher resolutions, such as 1440x900. That will tell us if the EDID issues you had earlier is related to the resolution problem.

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 6:42 pm  (#27) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Allrighty.
I am downloading some stuff right now and will do it afterwards.
If i can't boot back in then i will boot via the USB and leave a post here.

Thanks for your help guys. :)

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Mon Aug 20, 2012 6:53 pm  (#28) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Didn't you say that you were getting the higher resolutions at one point? Then you started having other EDID errors that wouldn't even allow you to boot. I'm thinking those issues are related but I just don't know to what extent.

I can't imagine you would not be able to boot after that. Good luck, Rod. :cool

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Tue Aug 21, 2012 2:54 pm  (#29) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Okay i powered down the PC and left the monitor on while i unplugged it from the back of the PC.
Then i plugged the monitor back in and powered up.Everything loaded fine but my display settings still only show 2 settings 800x600 and 1024x768.

It's like the PC isn't recognizing the new Acer monitor (1440x900), and defaults back to the standard one.
Which used to be 1024x768.

Even when i had Windows running it didn't add nor find new hardware when i did the same thing to try and fix it.And normally Windows finds new hardware right away.
I have no idea what i did with my Acer monitor software either :lol.

I wonder if i can get the drivers for my monitor online?

But it did start up okay. :)

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Tue Aug 21, 2012 3:40 pm  (#30) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Rod wrote:
Okay i powered down the PC and left the monitor on while i unplugged it from the back of the PC.
Then i plugged the monitor back in and powered up. Everything loaded fine ..... But it did start up okay. :)

Well, that is good. You certainly need an OS that allows you to reboot without reinstalling. :hehe

So what we know now is..

1) EDID communications between the PC and the display is not working properly, even after a power cycle and reboot.
2) You can recover from the EDID checksum error by power cycling the monitor.

Rod wrote:
It's like the PC isn't recognizing the new Acer monitor (1440x900), and defaults back to the standard one.
Which used to be 1024x768.

Even when i had Windows running it didn't add nor find new hardware when i did the same thing to try and fix it.And normally Windows finds new hardware right away.

This tells us that EDID has never really worked. Like Linux, Windows will attempt to use EDID to detect the display's specs but if that fails, most Windows video drivers will allow you to force the resolutions, some will not.

Rod wrote:
I have no idea what i did with my Acer monitor software either :lol. I wonder if i can get the drivers for my monitor online?

In Windows, you can load the monitor profile from a disk. This is sometimes necessary when EDID fails. Normally, it doesn't work that way in Linux, although I have seen cases where people were using custom EDID info in the X configuration.

If you can't find another solution, you may be looking at trying YAFU's suggestion and attempting to create an xorg.conf that loads the Radeon driver and forces the resolutions. That will be trail & error and if there is any issue with the xorg.conf, the system will not boot to X until you correct, move or delete the xorg.conf you are testing. That is easy enough to do though. You can boot (or toggle) to a command prompt and delete the test xorg.conf and you'll be right back up.

Now is the time to check out your Xorg.0.log file. It's located in /var/log. Would you post a copy of that file back to this thread so we can take a look?

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 8:38 am  (#31) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Sure thing Tux here it is. :)


Attachments:
File comment: Xorg.0.log EDID failed - Monitor Not Detected
Xorglog-bad-edid.zip [6.73 KiB]
Downloaded 87 times

_________________
Image
Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 3:24 pm  (#32) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Hey Tux i recently purchased a plug-in named Plaid Lite (an Adobe plugin by Name Supressed), and it froze my screen on the installer dialog window.I couldn't get the computer to logout or reset so i unplugged the entire thing, and waited 3 seconds and plugged it back in.
Evidently that was enough to make the PC see the monitor and now...

Image

Image

Thanks for all your help. :) :bigthup

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 5:44 pm  (#33) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Hey, that's great news, Rod. :yes

Just shutting down the PC doesn't always remove power from the mainboard or the bus. Maybe pulling the plug cleared whatever was blocking the PC from grabbing the EDID properly. Maybe power cycling the monitor and then turning it on, then power cycling the PC, is the sequence you need for the PC to be able to properly grab the EDID.

Hopefully, this will work the next time you need to reboot or when your electrical service flickers. Now that you know there is a sequence of power cycling events that work, I'm sure you'll figure out how to repeat the process, when needed.

It would be interesting to see the new xorg.0.log that actually worked and compare that to the one that didn't. When you get a chance, could post the current /var/log/Xorg.0.log so we can check out the differences?

Also, now that you have a working configuration, you should go ahead and generate an xorg.conf file that we know works. You can generate it by opening a terminal, logging on as root and entering....

Xorg :1 -configure

That will generate an xorg.conf right there in the /root folder. You'll have a good xorg.conf just in case you need it in the future, for whatever reason.

You could also post a copy of it here so we can check it out. I know that sounds nerdy but I just like to see those kinds of things. :geek

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 6:07 pm  (#34) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Here is what i get when i tried to make the new file. :)
[root@rod ~]# Xorg :1 -configure

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: x86-07 2.6.32-220.17.1.el6.x86_64
Current Operating System: Linux rod 3.5.2-1.fc17.i686 #1 SMP Wed Aug 15 16:52:27 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.2-1.fc17.i686 root=/dev/mapper/vg_rod-lv_root ro rd.md=0 rd.lvm.lv=vg_rod/lv_swap rd.dm=0 SYSFONT=True KEYTABLE=us rd.lvm.lv=vg_rod/lv_root rd.luks=0 LANG=en_US.UTF-8 rhgb quiet
Build Date: 26 June 2012  04:33:13AM
Build ID: xorg-x11-server 1.12.2-4.fc17
Current version of pixman: 0.24.4
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed Aug 22 19:04:58 2012
List of video drivers:
   geode
   ast
   ati
   cirrus
   nouveau
   qxl
   amd
   intel
   vmware
   dummy
   mga
   ztv
   radeon
   openchrome
   fbdev
   vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting.
Number of created screens does not match number of detected devices.
  Configuration failed.
Server terminated with error (2). Closing log file.
[root@rod ~]#



Strange what?

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 6:11 pm  (#35) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Yeah, I get that error too Rod. It still creates the xorg.conf though. It should be there in your /root folder if you need it.

It's a very large and comprehensive xorg.conf though. It looks like it's creating definitions for a bunch of virtual screens. It still may be useful in the future.

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Wed Aug 22, 2012 6:45 pm  (#36) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Here is the log file that worked..


Attachments:
File comment: Xorg.0.log EDID successful - Monitor detected
Xorglog-good-edid.zip [8.85 KiB]
Downloaded 82 times

_________________
Image
Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Thu Aug 23, 2012 11:46 am  (#37) 
Offline
GimpChat Founder
User avatar

Joined: May 22, 2008
Posts: 5244
Location: Gimpville
Thanks Rod. You can clearly see where your monitor was recognized in that last xorg log (I zipped and attached them).

Would you post a copy of the newly created xorg.conf.new? It's located in your /root folder. You will not be able to access that folder as a "regular" user. You'll need to be super user. The easiest way is to open a terminal and login as root, then run nautilus (file manager) as root. Just enter nautilus and press enter. You can then open xorg.conf.new or copy it to your desktop.

Sometimes it's necessary to run nautilus (or another file manager) as root but be careful when you do. You'll have full access to all of your system files. ;)

_________________
"If Microsoft ever does applications for Linux it means I've won." - Linus Torvalds


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Thu Aug 23, 2012 6:43 pm  (#38) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Here you go Tux. :)

Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   Screen      1  "Screen1" RightOf "Screen0"
   Screen      2  "Screen2" RightOf "Screen1"
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "catalogue:/etc/X11/fontpath.d"
   FontPath     "built-ins"
EndSection

Section "Module"
   Load  "dbe"
   Load  "extmod"
   Load  "record"
   Load  "dri2"
   Load  "dri"
   Load  "glx"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Monitor"
   Identifier   "Monitor1"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Monitor"
   Identifier   "Monitor2"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "Dac8Bit"               # [<bool>]
        #Option     "BusType"               # [<str>]
        #Option     "CPPIOMode"             # [<bool>]
        #Option     "CPusecTimeout"         # <i>
        #Option     "AGPMode"               # <i>
        #Option     "AGPFastWrite"          # [<bool>]
        #Option     "AGPSize"               # <i>
        #Option     "GARTSize"              # <i>
        #Option     "RingSize"              # <i>
        #Option     "BufferSize"            # <i>
        #Option     "EnableDepthMoves"      # [<bool>]
        #Option     "EnablePageFlip"        # [<bool>]
        #Option     "NoBackBuffer"          # [<bool>]
        #Option     "DMAForXv"              # [<bool>]
        #Option     "FBTexPercent"          # <i>
        #Option     "DepthBits"             # <i>
        #Option     "PCIAPERSize"           # <i>
        #Option     "AccelDFS"              # [<bool>]
        #Option     "IgnoreEDID"            # [<bool>]
        #Option     "CustomEDID"            # [<str>]
        #Option     "DisplayPriority"       # [<str>]
        #Option     "PanelSize"             # [<str>]
        #Option     "ForceMinDotClock"      # <freq>
        #Option     "ColorTiling"           # [<bool>]
        #Option     "VideoKey"              # <i>
        #Option     "RageTheatreCrystal"    # <i>
        #Option     "RageTheatreTunerPort"    # <i>
        #Option     "RageTheatreCompositePort"    # <i>
        #Option     "RageTheatreSVideoPort"    # <i>
        #Option     "TunerType"             # <i>
        #Option     "RageTheatreMicrocPath"    # <str>
        #Option     "RageTheatreMicrocType"    # <str>
        #Option     "ScalerWidth"           # <i>
        #Option     "RenderAccel"           # [<bool>]
        #Option     "SubPixelOrder"         # [<str>]
        #Option     "ClockGating"           # [<bool>]
        #Option     "VGAAccess"             # [<bool>]
        #Option     "ReverseDDC"            # [<bool>]
        #Option     "LVDSProbePLL"          # [<bool>]
        #Option     "AccelMethod"           # <str>
        #Option     "DRI"                   # [<bool>]
        #Option     "ConnectorTable"        # <str>
        #Option     "DefaultConnectorTable"    # [<bool>]
        #Option     "DefaultTMDSPLL"        # [<bool>]
        #Option     "TVDACLoadDetect"       # [<bool>]
        #Option     "ForceTVOut"            # [<bool>]
        #Option     "TVStandard"            # <str>
        #Option     "IgnoreLidStatus"       # [<bool>]
        #Option     "DefaultTVDACAdj"       # [<bool>]
        #Option     "Int10"                 # [<bool>]
        #Option     "EXAVSync"              # [<bool>]
        #Option     "ATOMTVOut"             # [<bool>]
        #Option     "R4xxATOM"              # [<bool>]
        #Option     "ForceLowPowerMode"     # [<bool>]
        #Option     "DynamicPM"             # [<bool>]
        #Option     "NewPLL"                # [<bool>]
        #Option     "ZaphodHeads"           # <str>
   Identifier  "Card0"
   Driver      "radeon"
   BusID       "PCI:1:5:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "Rotate"                # <str>
        #Option     "fbdev"                 # <str>
        #Option     "debug"                 # [<bool>]
   Identifier  "Card1"
   Driver      "fbdev"
   BusID       "PCI:1:5:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "DefaultRefresh"        # [<bool>]
        #Option     "ModeSetClearScreen"    # [<bool>]
   Identifier  "Card2"
   Driver      "vesa"
   BusID       "PCI:1:5:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection

Section "Screen"
   Identifier "Screen1"
   Device     "Card1"
   Monitor    "Monitor1"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection

Section "Screen"
   Identifier "Screen2"
   Device     "Card2"
   Monitor    "Monitor2"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection

_________________
Image


Top
 Post subject: Re: Fedora black and white screen of death?
PostPosted: Sat Aug 25, 2012 4:32 pm  (#39) 
Offline
GimpChat Member
User avatar

Joined: Nov 09, 2011
Posts: 726
Have you been able to solve the problem?
I have long been a ATI user. Luckily I stopped suffering and now I am a happy nVidia user :) (I think Torvalds would not agree with me :mrgreen: )
I can try to manually create a xorg.conf for you. For that I need you tell me where to download the manual for your monitor (Exactly the same model). I need to know the refresh rate of your monitor which should appear in the specifications of the manual. You also tell me the preferred resolution you use.

_________________
Image
Be patient, English is not my language.


Top
 Post subject: Re: Fedora black and white screen of death? [Solved]
PostPosted: Sat Aug 25, 2012 7:36 pm  (#40) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
Thanks Yafu but unplugging the monitor forced the software to see my monitor res so i am all set.
So unplugging the PC was the fix. :)

_________________
Image


Top
Post new topic Reply to topic  [ 41 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC - 5 hours [ DST ]



* Login  



Powered by phpBB3 © phpBB Group