It is currently Tue Nov 17, 2026 9:25 am


All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: I do not understand resizing
PostPosted: Sun Nov 21, 2010 12:03 am  (#1) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
I have some image files that were scanned at 600dpi. This creates a 51mg file from a 6x8 inch negative. Now I change the mode from RGB to grayscale and this brings the size down to about 17mg.
Now, from what I understand, 17mg (grayscale) is the number of pixels and 51mg (RGB) is the number of pixels times three, because each pixel needs 3 memory spots (R,G and B). Correct?

Now, these images will print HUGE. But I want to use them on websites, especially on ebay. So I need to save another copy that will produce a clear image on the web but I do not want anyone to be able to get a copy that they can make a good print from.

What is my solution for this problem? Do I want to "scale" the image or change "print size" or should I use the "right click nautilus file resizer"? Or is it impossible to get a printable image off a website or ebay?

Please explain.


Share on Facebook Share on Twitter Share on Orkut Share on Digg Share on MySpace Share on Delicious Share on Technorati
Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 12:47 am  (#2) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
If you make a copy of the image at 72 dpi for your page anyone trying to print it out will get a pretty bad print-out.
300 dpi is print standard, as well as 72 dpi being web-page standard.

You also have the option of using a watermark.

Hope that helps. =)

_________________
Image


Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 1:05 am  (#3) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
But do I need to rescan at 72dpi or can I convert? How?


Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 1:10 am  (#4) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
I think I found the answer. Image>print-size>x/y-resolution. Please confirm.


Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 1:39 am  (#5) 
Offline
GimpChat Member

Joined: Nov 04, 2010
Posts: 67
I guess that my question is, why, if I change the resolution to 72dpi am I still able to enlarge the image on my screen (HUGE) and still get a clear image? Yhis is the old problem of confusing screen resolution and print resolution I assume. I have read quite a bit about it but am still confused by it. Is the confusion related to the difference between DPI and PPI?


Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 2:11 am  (#6) 
Offline
Script Coder
User avatar

Joined: Apr 23, 2010
Posts: 1553
Location: not from Guildford after all
The "resolution" specified by Print Size does not alter the image. The only thing it changes is the units displayed in various dialogs and status lines (and shown on the rulers if Dot For Dot is disabled).

Also, with regard to terminology, GIMP is fairly consistent about using the term "resize" in referring to altering the boundaries of an image or layer (without altering the graphical content within those boundaries); while using "scale" to describe actually increasing or decreasing the size of the graphical content.

_________________
Any sufficiently primitive technology is indistinguishable from a rock.


Top
 Post subject: Re: I do not understand resizing
PostPosted: Sun Nov 21, 2010 4:36 am  (#7) 
Offline
Global Moderator
User avatar

Joined: May 16, 2010
Posts: 16274
What i mean is resize your image to the size for your web-page, and set the ppi for that copy to 72.
The image will be small and not very good looking after print, if you are worried about image theft.

That's what i thought you meant.

_________________
Image


Top
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]



* Login  



Powered by phpBB3 © phpBB Group